Instrumentation is described that has been constructed at the National Institute of Standards and Technology (NIST) for the measurement of regular re ̄ectance and transmittance over the 2±25 mm wavelength region. This includes both specialized accessories used with Fourier-transform infrared (FT-IR) spectrometers and laser-based systems for high optical density transmittance measurements. The FT...

We have investigated the ordinate scale accuracy of ambient temperature transmittance measurements made with a Fourier transform infrared (FT-IR) spectrophotometer over the wavelength range of 2-10 mum. Two approaches are used: (1) measurements of Si wafers whose index of refraction are well known from 2 to 5 mum, in which case the FT-IR result is compared with calculated values; (2) comparison...

background: welding emits harmful rays to the eyes. we evaluate and compare the uv, blue light and ir transmittance characteristics of some currently available welding safety protectors with ansi z87.1 criteria. materials and methods: three type of welding safety protectors (three of each type) have been evaluated for spectral transmittance. one-sample t-test was performed to establish is there...

In the present study, a tough tetragonal zirconia polycrystalline (Y-TZP) material was developed for use in high-speed infrared windows and domes. The influence of the preparation procedure and the microstructure on the material's optical properties was evaluated by SEM and FT-IR spectroscopy. It was revealed that a high transmittance up to 77% in the three- to five-micrometer IR region could b...

Optoelectronic properties of CVD graphene are characterized over a wide frequency range: THz, IR, visible and near-UV. We used Raman spectroscopy to characterize the synthesized graphene films. All graphene layers were deposited on various substrates, some ones transparent or flexible, such as polyethylene terephthalate (PET), polyethylene naphthalate (PEN), quartz and silicon. Transmission Ter...

Optical glasses are optimized to provide excellent transmittance throughout the total visible range from 400 to 800 nm. Usually the transmittance range spreads also into the near UV and IR regions. As a general trend lowest refractive index glasses show high transmittance far down to short wavelengths in the UV. Going to higher index glasses the UV absorption edge moves closer to the visible ra...

In the increasing research field of 2D materials such as graphene, molybdenum disulfide MoS2 has attracted great interest due to the existence of a direct bandgap in monolayer MoS2, which gives the possibility of achieving MoS2 fieldeffect transistors or optoelectronic devices. We analyzed by THz time-domain spectroscopy (THz-TDS) up to 2 THz and infrared (IR) spectroscopy, CVD-obtained MoS2 us...

Indium tin oxide (ITO) films have been deposited onto glass substrates by ifmagnetron sputtering without insitu substrate heating. The as-deposited films have an electrical resistivity of 5x1O a-cm, visible transmittance of about 85%, and infrared (IR) reflectance of above 80% at 5 jim. The effect of sputtering parameters on the deposition rate and the electrical and optical properties of ITO f...

Available literature on the spectral transmittance of the eye media in the infrared (IR) is insufficiently accurate to estimate the deposited doses, e.g. in view of light damage risks. Analysis of the data of Boettner and Wolter [Investigative Ophthalmology and Visual Science, 1, 776-783 (1962)] for cornea, anterior chamber, lens and vitreous separately, shows that they can be explained on the ...